LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (3.0L - Exhaust System & Emission Controls - Engine Code: CNRB) >> 26 Exhaust System, Emission Controls >> Exhaust Temperature Regulation >> Exhaust Gas Temperature Sensor 4 -G648-, REMOVING AND INSTALLING >> Installing

Exhaust Gas Temperature Sensor 4 -G648-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following.

-- Align the Exhaust Gas Temperature Sensor 4 -G648- so that the distance to the surrounding components is as large as possible.

scientia non olet · About LEMON Manuals