Transmission, Transporting

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Attachment and holding rig3457

Fig 1: Attachment And Holding Rig 3457
Courtesy of AUDI OF AMERICA, LLC
Support bridge30-211 A

Fig 2: Bracket 30 - 211 A
Courtesy of AUDI OF AMERICA, LLC

Procedure

-- Secure torque converter in transmission against falling out with bracket30-211 A.

Fig 3: Identifying Bracket -30-211A- Attached To Secure Torque Converter

Courtesy of AUDI OF AMERICA, LLC

The Transmission Support3282 can be used when transporting the automatic transmission and for setting up the Attachment and Holding Rig3457.

NOTE:

Bolt on Attachment and Holding Rig3457 should only be installed by hand in transmission.

If screw is installed with pliers, transmission housing can be damaged.

-- Attach attachment and holding rig3457 to mounts on transmission housing and secure.

Fig 4: Holding Rig 3457 To Mounts On Transmission Housing

Courtesy of AUDI OF AMERICA, LLC