Selector Lever Knob, Servicing, Assembly Overview: Notes

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Overview:

Fig 1: Identifying Knob, Boot And Transmission Range Position Display Unit Overview

Courtesy of AUDI OF AMERICA, LLC

Clamp
- For securing the selector lever handle to the selector lever
- Removing and Installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
Trim Ring
- Removing and Installing. Refer to SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE .
Selector Lever Handle
- SELECTOR LEVER HANDLE, REMOVING AND INSTALLING
Selector Lever Boot
- SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE
Selector Lever Transmission Range Position Display Unit -Y26-
- Must not be removed to remove selector lever handle.
- Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING