Reducing Agent Metering System Control Module -J880-, REMOVING AND INSTALLING: Installation

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification. Refer to Reducing Agent Metering System Control Module -J880- OVERVIEW .

-- Install the sill panel strip. Refer to SILL PANEL STRIP, REMOVING AND INSTALLING .

-- Install the right rear single seat in the second row of seats. Refer to Seat Frames .

-- Connect the battery and complete the steps required after connecting the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .