Reducing Agent Injector -N474- OVERVIEW
WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification: 5 Nm
- Clamp
- Seal
- Replace
- Reducing Agent Injector -N474-
- Removing and Installing. Refer to Reducing Agent Injector -N474-, REMOVING AND INSTALLING .
- Hose
- For the reducing agent.
- To disconnect, press release button on connection piece.
- Connector
- SCR Catalytic Converter