LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Oil Pan, Oil Strainer, Valve Body, Selector Lever & MULTIFUNCTION Transmission Range Switch) >> 38 Gears, Hydraulic Controls >> Oil Pan, Oil Strainer And Valve Body >> Transmission Output Speed Sensor -G195-, REMOVING AND INSTALLING >> Removing

Transmission Output Speed Sensor -G195-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the valve body. Refer to VALVE BODY, REMOVING AND INSTALLING .

-- Remove the bolt -arrow- from the Transmission Output Speed Sensor -G195-.

Fig 1: Identifying Bolt From Transmission Output Speed (RPM) Sensor G195
GWWN38-10041Courtesy of AUDI OF AMERICA, LLC

-- Remove sensor from transmission.

scientia non olet · About LEMON Manuals