Overview - Valve Body
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The valve body and/or the lines can be removed/installed with the transmission removed/installed.
- Solenoid Valve 2 -N89-
- Transmission Output Speed Sensor -G195- Connector
- The sensor is located behind the valve body.
- Automatic Transmission Hydraulic Pressure Sensor 2 -G194-
- Removing and installing. Refer to Automatic Transmission Hydraulic Pressure Sensor 1 -G193- AND Automatic Transmission Hydraulic Pressure Sensor 2 -G194-, REMOVING AND INSTALLING .
- Automatic Transmission Hydraulic Pressure Sensor 1 -G193-
- Removing and installing. Refer to Automatic Transmission Hydraulic Pressure Sensor 1 -G193- AND Automatic Transmission Hydraulic Pressure Sensor 2 -G194-, REMOVING AND INSTALLING .
- Solenoid Valve 4 -N91-
- Transmission Input Speed Sensor -G182- Connector
- Transmission Fluid Temperature Sensor -G93-
- Solenoid Valve 6 -N93-
- Solenoid Valve 3 -N90-
- Solenoid Valve 5 -N92-
- Solenoid Valve 10 -N283-
- Solenoid Valve 9 -N282-
- Solenoid Valve 1 -N88-
NOTE:
Refer to SSP# 367 - 6-Speed Automatic Transmission 09D.