Automatic Transmission Hydraulic Pressure Sensor 1 -G193- AND Automatic Transmission Hydraulic Pressure Sensor 2 -G194-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications. Refer to OIL PAN, OIL STRAINER AND VALVE BODY .

-- Connect the connectors -1 and 2-.

Connectors must engage.

-- Install the oil screen. Refer to OIL SCREEN, REMOVING AND INSTALLING .

-- Install the oil pan. Refer to ATF PAN, REMOVING AND INSTALLING .

-- Fill with ATF and check the level. Refer to ATF, DRAINING OR FILLING AFTER REPAIR .