ATF Pan, Removing And Installing: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front/Rear Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear noise insulation -2-. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Place the Used Oil Collection And Extraction UnitSMN372500 under the transmission.

Fig 2: Identifying Oil Pan Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the drain plug -1-.

-- Drain the ATF.

-- Remove the ATF pan bolts diagonally and remove the ATF pan.