Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Bolt Size | Nm |
|---|---|---|
| Bolts/nuts | ||
| M6 | 9 | |
| M8 | 20 | |
| M10 | 40 | |
| M12 | 65 | |
| Exceptions: | ||
| Drive plate to torque converter | 85 1 | |
| Engine carrier | 120 + 180°1 | |
| Engine mount, left | 60 | |
| Engine mount, right | 60 | |
| Left engine support | ||
| Bolt | 50 + 90°1 | |
| Nut | 75 | |
| Right engine support | ||
| Bolt | 50 + 90°1 | |
| Nut | 75 | |
|
||
Engine/Transmission, Fastening
| Item | Bolt | Nm |
|---|---|---|
| 1, 2 | M10x70 | 45 |
| 3 to 6 | M12 x 80 | 80 |
| 7 | M12x140 | 80 |
| 8 | M12x70 | 80 |
| 9, 10 | M12x50 | 80 |
| A | Alignment sleeves for centering | |