Special Tools

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools - Engine, Removing

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required

Pry Lever 80-200
Used Oil Collecting and Extracting Device VAG 1782
Step Ladder VAS 5085
Engine Bung Set VAS 6122
Scissor Lift Table VAS 6131 A with Support Set VAS 6131/10 as well as Supplementary Set VAS 6131/11, VAS 6131/13 and qty. 3 VAS 6131/10-2
Drip Tray for Workshop Crane VAS 6208

Fig 2: Identifying Special Tools -- Engine Mount, Replacing

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required

Engine Support Bridge 10 - 222 A
Bracket with Spindle and Hook 10 - 222 A /10, qty. 2
Adapter 10 - 222 A /19
Adapter 10 - 222 A /22
Hose Clamps Up to 25 mm Dia.3094
Engine Support Basic Set T40091

Fig 3: Identifying Special Tools - Engine, Securing To Assembly Stand

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required

Lifting Tackle 3033
Engine and Transmission Holder VAS 6095 with V8 FSI Engine Holder 6095/1-6A
Shop Crane VAS 6100
Lift Arm Extension for Workshop Crane VAS 6101

Special tools and workshop equipment required

Hose Clamp Pliers VAS 6362

Fig 4: Hose Clamp Pliers VAS 6362
Courtesy of AUDI OF AMERICA, LLC
Counterhold Tool T10172 with T10172/8

Fig 5: Counterhold Tool T10172
Courtesy of AUDI OF AMERICA, LLC
Ball Joint Puller T10187

Fig 6: Ball Joint Puller T10187
Courtesy of AUDI OF AMERICA, LLC
Bracket 30-211 A

Fig 7: Bracket 30-211 A
Courtesy of AUDI OF AMERICA, LLC
Adapter T40058

Fig 8: Crankshaft Socket T40058
Courtesy of AUDI OF AMERICA, LLC
Engine Support Supplement Set T40093

Fig 9: Engine Support Supplement Set T40093
Courtesy of AUDI OF AMERICA, LLC