LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (3.6L - Engine Assembly - Engine Code: BHK) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Components Bolt Size Nm
Bolts and Nuts
  M6 10
M7 15
M8 22
M10 40
M12 65
Drive Plate to Torque Converter Bolt (1) - 85
Noise Insulation Bracket to Body - 9
(1) Always replace

Transmission to Engine Bolt Location and Tightening Specifications 

Fig 1: Identifying Transmission To Engine Mounting Bolts
GWWA10-10712Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1, 8, 9, 10 M10 x 50 45
2 M12 x 70 80
3 (1), 4, 5 M12 x 60 80
6 (2), 7 M12 x 140 80
A Alignment sleeves for centering
(1) Double bolt.
(2) Threaded fastener with nut.
scientia non olet · About LEMON Manuals