Oil Level Thermal Sensor: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain engine oil. Refer to Standard Maintenance Service .

-- Disconnect electrical connector -3-.

Fig 1: Locating Oil Level Thermal Sensor G266 And O-Ring Gasket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -1- and the oil level thermal sensor -G266- -4-.