Mass Airflow Sensor -G70-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect electrical harness connector at Mass Airflow Sensor -G70-.

-- Open the clamp on the air guide hose and disconnect the hose from the Mass Airflow Sensor -G70-.

-- Remove bolts -arrows-.

Fig 1: Identifying Mass Air Flow (MAF) Sensor G70 Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the mass air flow sensor from the guide on the air filter upper section.