Intermediate Flange, Removing And Installing: Removal

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connecting Pipe And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear coolant pipe REAR COOLANT PIPE, REMOVING AND INSTALLING .

-- Remove the primary catalytic converter. Refer to PRIMARY CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Remove the exhaust gas recirculation auxiliary cooler. Refer to EGR AUXILIARY COOLER, REMOVING AND INSTALLING .

-- Remove the bolts -3- and -4- and remove the exhaust gas recirculation pipes.

NOTE:

Bolts -1- and -2- were already removed.

-- Remove the bolts -1 and 2- and -arrows- and remove the intermediate flange.

Fig 2: Bolts -1 And 2- And -Arrows-

Courtesy of AUDI OF AMERICA, LLC