Transmission, Clean Working Conditions
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow repair instructions REPAIR INFORMATION .
- Always clean the connection locations and the area around them before loosening.
- Place removed parts on a clean surface and cover them. Use foil and paper. Use a lint-free cloth.
- Cover or plug unpacked components if repairs cannot be performed immediately.
- Only install clean components: Install replacement parts immediately after removing them from their packaging.
- Thoroughly clean the housing surfaces before assembling.