SELECTOR LEVER HANDLE, SELECTOR LEVER BOOT AND Selector Lever Transmission Range Position Display Unit - Y26-: Overview

WARNING: This page is about a different car, the 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Knob, Boot And Transmission Range Position Display Unit Overview

Courtesy of AUDI OF AMERICA, LLC

Clamp
- For securing the selector lever handle to the selector lever.
- Removing and installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
Trim Ring
- Removing and installing. Refer to SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE .
Selector Lever Handle
- Removing and installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
Selector Lever Boot
- Refer to SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE .
Selector Lever Transmission Range Position Display Unit -Y26-
- Removing and installing. Refer to Selector Lever Transmission Range Position Display Unit - Y26-, REMOVING AND INSTALLING .