LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Automatic Transmission 09D) >> 37 Controls, Housing >> Electrical And Electronic Components And Component Locations >> Transmission Control Module - J217-, REMOVING AND INSTALLING >> Installing

Transmission Control Module - J217-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Of Mount -3- And Control Modules Into Brackets
GWWA97-10300Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Connect the connectors -1 and 2- to the control modules.

-- Install the front passenger seat. Refer to Seat Frames .

-- Perform transmission adaptation Vehicle Diagnostic Tester, Guided Functions  .