LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (4.2L - Cooling System - Engine Code(S): Bar) >> 19 Cooling System >> Removal And Installation >> Engine Coolant Temperature Sensor -G62- >> Installing

Engine Coolant Temperature Sensor -G62-: Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in reverse order of removal, note the following:

NOTE:

Replace O-ring.

Secure all hose connections with hose clamps appropriate for the model. .

-- Insert ECT Sensor -- as quickly as possible so that coolant does not escape unnecessarily.

-- Check coolant level COOLING SYSTEM, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals