Vibration Damper, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Counterhold the generator ribbed belt pulley nut with a wrench and loosen the vibration damper bolts -1-.
-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the bolts and then remove the shim -2- and the vibration damper -3-.