Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Accessory Bracket Tightening Sequence
-- Tighten bolts -1 to 5- in 2 stages in sequence as follows:
| -- Tighten bolts by hand.-- Tighten bolts to 25 Nm. |
NOTE:
Install -1- and -2- are fitting bolts.
Sealing Flange Tightening Sequence
-- Tighten bolts in 3 stages as follows:
| -- Install bolts -1 to 11- and tighten by hand.-- Tighten bolts -1 to 6- diagonally in stages to 10 Nm.-- Tighten bolts -7 to 11- to 10 Nm. |