LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (3.6L - Crankshaft & Cylinder Block - Engine Code: BHK) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Crankshaft Dimensions

Crankshaft Dimensions

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Reconditioning Dimension, Dimensions in mm Crankshaft Bearing Pin Diameter Connecting Rod Bearing Pin Diameter
Basic dimension 1) 59.958 to 59.978 53.958 to 53.978
  • 1) Reworking is not permitted.
scientia non olet · About LEMON Manuals