SUBFRAME Assembly Overview

Fig 1: Engine Mount And Bracket Overview

GWWA10-11046

Courtesy of AUDI OF AMERICA, LLC

Engine Carrier
- Removing and installing, refer to ENGINE CARRIER
Bolt
- Replace
- 120 Nm plus an additional 180° turn
Right Engine Mount
- Removing and installing, refer to ENGINE MOUNT
Screw
- 60 Nm
Screw
- 15 Nm
Ground (GND) Strap
Bolt
- Replace
- 50 Nm plus an additional 90° turn
Nut
- 75 Nm
Right Engine Support
Left Engine Support
Double Bolt
- Replace
- 50 Nm plus an additional 90° turn
Bracket
- For the electrical connector
Nut
- 23 Nm
Nut
- 75 Nm
Bolt
- 60 Nm
Left Engine Mount
- Removing and installing, refer to ENGINE MOUNT
Bolt
- Replace
- 120 Nm plus an additional 180° turn