EGR Temperature Sensor

Special tools and workshop equipment required 

• Socket T40055

Removing 

-- Carefully pull the engine cover -arrows- off the 4 bolts one after the other.

Fig 1: Identifying Engine Cover -Arrows-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the EGR Temperature Sensor -G98- orange connector -1- from the bracket, disconnect it and then free up the electrical wire.

Fig 2: Identifying Orange Connector -1- And EGR Temperature Sensor -2-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the EGR temperature sensor -2- using T40055.

Installing 

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to EXHAUST GAS RECIRCULATION OVERVIEW .