Charge Air Cooler Overview

NOTE:

Pay attention to the rules of cleanliness. Refer to CLEAN WORKING CONDITIONS .

NOTE:

The illustration shows the left charge air cooler.

Fig 1: Charge Air Cooler Overview

Courtesy of AUDI OF AMERICA, LLC

Front Air Guide
- Attached to the charge air cooler
- Unclip it to the side to remove
O-ring
- Replace if damaged or leaking
Air Guide Hose
- From turbocharger
- Removing, refer to Figure
- Installing, refer to Figure
Bolt
- 9 Nm
Bolt
- 9 Nm
Air Guide Hose
- To the right charge air cooler
- Must be free of oil and grease when installing
Connecting Piece
Bolt
- 9 Nm
O-ring
- Replace
Charge Air Pressure Sensor -G31-
- Removing and installing, refer to CHARGE AIR PRESSURE SENSOR
Bolt
- 5 Nm
Air Guide Hose
- To the intake manifold
- Must be free of oil and grease when installing
O-ring
- Replace
Charge Air Cooler
- Removing and installing, refer to CHARGE AIR COOLER