Cooler -J698- COVER, REMOVING AND INSTALLING: Removing

Fig 1: Identifying Cover, Trim And Center Armrest

Courtesy of AUDI OF AMERICA, LLC

-- Fold the center armrest -3- upward.

-- Open the cover -1- above the cupholders.

-- Remove the trim -2- using the Trim Removal Wedge3409.

-- Pry the caps -4- off the screws.

Fig 2: Prying Caps -4- Off Screws

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1, 3 and 5-.

-- Pry the Cooler -J698- -item 2- out of the multi-box using the Trim Removal Wedge3409 -arrows-.

Fig 3: Prying Cooler -J698- -Item 2- Out Of Multi-Box Using 3409 -Arrows-

Courtesy of AUDI OF AMERICA, LLC

-- Carefully push the Cooler -J698- to the right until the hinge bolts are accessible.

-- Remove the left and right hinge bolts -2- with needle nose pliers -3- -arrow-.

-- Remove the cover -1- from the Cooler -J698- -4-.