LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Exterior - Exterior Equipment >> 66 Exterior Equipment >> Underbody Trim Panels >> Underbody Panel, OFFROAD Style Package Overview

Underbody Panel, OFFROAD Style Package Overview

Fig 1: Identifying Underbody Panel Assembly Overview
GWWA66-10264Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • 20 Nm
  2. Mount
  3. Bolt
    • 2 Nm
  4. Underbody Panel
    • The sill panel molding is removed. Refer to SILL PANEL MOLDING OVERVIEW .
    • It is necessary to use a body saw to make the openings for new trim.
  5. Underbody
  6. Bolt
    • 2 Nm

Openings for the Underbody Panel

NOTE:

Before installing new trim, the illustrated openings must be made at the same location where they were removed.

Make the openings according to the template supplied.

Fig 2: Identifying Underbody Panel Openings
GWWA66-10263Courtesy of AUDI OF AMERICA, LLC
  1. Underbody Panel
    • Cut out the openings -A, B and C- with a body saw according to the template.
scientia non olet · About LEMON Manuals