Lock Carrier With Attachments Overview

-- Disconnect battery.

-- Remove the front bumper. Refer to FRONT BUMPER, REMOVING AND INSTALLING .

-- Loosen wheel housing in area of bolting point to bumper. Refer to FRONT WHEEL HOUSING LINERS, REMOVING AND INSTALLING .

-- Remove the bolts from the lower noise insulation. Refer to NOISE INSULATION OVERVIEW .

-- Remove seal on lock carrier and transition to fender. Refer to HOOD SEAL, REMOVING AND INSTALLING .

-- Remove the headlamp. Refer to HEADLAMP, REMOVING AND INSTALLING .

-- Disconnect release at connector station. Refer to HOOD RELEASE CABLE OVERVIEW .

-- On vehicles with charge air cooler, pressure hoses must also be disconnected

-- Remove bolts -4 and 3-.

-- Remove screws -2- from longitudinal member.