Backrest Cover And Padding Overview

Fig 1: Identifying Backrest Cover And Padding

Courtesy of AUDI OF AMERICA, LLC

Handle
- Seat, folding
- Removing and Installing. Refer to HANDLE, REMOVING AND INSTALLING .
Trim
- Seat, folding
- Removing and Installing. Refer to TRIM, REMOVING AND INSTALLING .
Headrest
- Tightening specification: 10 Nm
- 2 screws
- Replace screws after each removal.
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING .
Headrest Cover
- Removing and Installing. Refer to HEADREST COVER, REMOVING AND INSTALLING .
Cover and Upholstery
- Removing and Installing. Refer to BACKREST COVER AND UPHOLSTERY, REMOVING AND INSTALLING .
Cover
- Tightening specification: 2 Nm
- Left and right sides
- 2 x 2 screws
- Removing and Installing. Refer to COVER, REMOVING AND INSTALLING .
Center Bearing Cover
- Removing and Installing. Refer to CENTER BEARING COVER, REMOVING AND INSTALLING .
Seat Cushion
- Removing and Installing. Refer to SEAT CUSHION, REMOVING AND INSTALLING .
Fastening Strips