LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Upholstery & Covers >> 74 Seat Upholstery, Covers >> Covers And Cushion, Power Front Seats (Comfort Seat With Or Without Memory Function) >> Backrest Heating Element, Removing And Installing >> Installing

Backrest Heating Element, Removing And Installing: Installing

-- Align new heating element on backrest cushion.

CAUTION:
  • Make sure the new heating elements are bonded so they line up with the old ones.
  • Remove the protective foil off the heating element in the affixing sequence.
  • When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.

-- Bond the individual areas of the heating element in the sequence -A and B-.

-- Pull electrical wire -3- through the slit in cushion -1-.

Install in reverse order of removal.

scientia non olet · About LEMON Manuals