LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Upholstery & Covers >> 74 Seat Upholstery, Covers >> Covers And Cushion, Mechanical Front Seats >> Seat Heating Element, Removing And Installing >> Installing

Seat Heating Element, Removing And Installing: Installing

-- Align new heating element -1- on seat padding.

-- Remove protective foil and attach heating element to padding surface.

-- Route connecting wires at locations -3- in bottom of gaps, avoiding crossover.

NOTE:

It is attached over old heating element.

scientia non olet · About LEMON Manuals