Technical Data: Capacities

ATF Area in the Transmission

Capacities	Automatic Transmission 0B6
Original filling by the manufacturer	Approximately 10.4 liters (10.98 quarts)
Change	No change Permanent fill; only change after repairs such as when removing the ATF pan
Lubricant	ATF for automatic transmission 0B6.

CAUTION:

There is a risk that the transmission could malfunction or fail.

Only use the ATF available as a replacement part with the 0B6 automatic transmission.

Refer to AUTOMATIC TRANSMISSION FLUID

Front Final Drive

Capacities	Automatic Transmission 0B6
Initial filling	1.0 liter (1.05 quarts)
Change	No change Permanent fill; change only after repairs such as removing the front final drive cover
Lubricant	Gear oil for automatic transmission 0B6.

Refer to GEAR OIL

Transfer Case

Capacities	Automatic Transmission 0B6
Initial filling	1.0 liter (1.05 quarts)
Change	No change Permanent fill; change only after repairs such as removing the center differential housing
Lubricant	Gear oil for automatic transmission 0B6..

Refer to GEAR OIL