Overview - Glove Compartment

Fig 1: Identifying Glove Compartment

Courtesy of AUDI OF AMERICA, LLC

Storage Compartment
- Equipment levels
- Removing and installing. Refer to GLOVE COMPARTMENT STORAGE COMPARTMENT, REMOVING AND INSTALLING .
Glove Compartment Lamp -W6-
- Removing and Installing. Refer to Lamps .
Footwell Lamp
- Equipment levels
- Removing and installing. Refer to Lamps
Passenger Side Instrument Panel Cover
- Removing and installing. Refer to FRONT PASSENGER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 2
Hinge Pin
- For securing the glove compartment cover
Glove Compartment
- Removing and installing. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
Brake Component
- For the glove compartment lid
- With Glove Compartment Lamp Switch -E26-
- Removing and installing. Refer to GLOVE COMPARTMENT LID BRAKING ELEMENT, REMOVING AND INSTALLING .
Hinge Pin
Spring Nut
Bolt
- 3 Nm
Front Passenger Airbag Deactivation Key Switch -E224-
- Not for North American market.
Bolt
- 3 Nm
- Quantity: 4 or 5 depending on the country
Cold Air Vent/Blind Cover
- Equipment levels
Bolt
- 3 Nm
- The quantity depends on the equipment level or the country
Glove Compartment Cover
- Removing and installing. Refer to GLOVE COMPARTMENT LID, REMOVING AND INSTALLING .
Glove Compartment Opener
- Removing and installing. Refer to GLOVE COMPARTMENT HANDLE, REMOVING AND INSTALLING .
Stop Buffer
- For the glove compartment lid