Coolant, Draining And Filling, Hybrid Vehicles: Draining

WARNING: This page is about a different variant/trim than selected.

WARNING:

Risk of scalding due to hot steam and hot coolant.

The coolant system is under pressure when the engine is warm.
Reduce pressure by covering coolant reservoir cap with a cloth and carefully opening.

-- Open the coolant reservoir cap.

-- Remove the front noise insulation, refer to OVERVIEW - NOISE INSULATION .

-- Place the Shop Crane - Drip Tray VAS6208 under engine.

Fig 1: Coolant Hose Connection And Clamp

Courtesy of AUDI OF AMERICA, LLC

-- Open the clamp -2-, remove the coolant hose and drain the coolant.

NOTE:

Ignore item -1-.