Input Shaft: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Thrust Plate VW 401
- Thrust Plate VW 402
- Punch VW 407
- Punch VW 408 A
- Thrust Disc VW 412
- Thrust Tube VW 454
- Tube 60 mm Dia.VW 415 A
- Press Tube 2040
- Press Support 3118
- Tube 3296
- Assembly Tool T40213
- Shop Press V.A.G 1290A
- Inductive Heater VAS 6414
- Separating Tool 22 to 115 mm, for example, Kukko 17/2
- Feeler Gauge