Overview - Lower Rear Lid Trim Panel (AVANT)

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Lower Rear Lid Trim Panel (Avant)

Courtesy of AUDI OF AMERICA, LLC

Cover
- for tail lamps
- Removing and installing. Refer to TAIL LAMP COVER, REMOVING AND INSTALLING .
Rubber Buffer
- Quantity: 6
- Insert in the trim panel
Clip
- Quantity: 12
- Insert in the trim panel
- Replace if damaged or deformed
- Remove the clips that are still in the mounting points on the body using the Omega Clip Tool T40280.
Lower Rear Lid Trim Panel
- Removing and installing. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING (AVANT) .
Luggage Compartment Lamp
- Removing and installing. Refer to [For engine(s) CCBA, CGXC, CTUB, CAED, CAEB, CALA, CPMB, CPMA] Lamps .
Cover
- for the warning triangle
- Removing and installing. Refer to EMERGENCY TRIANGLE COVER, REMOVING AND INSTALLING .
Cover
- For the emergency release
Trim Panel
- For rear lid lock
- Removing and installing. Refer to REAR LID LOCK TRIM PANEL, REMOVING AND INSTALLING (AVANT) .
Bolt
- 2 Nm
- Quantity: 4