Base bracket, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Torque Wrench V.A.G 1783

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Torque wrench V.A.G 1783

Fig 2: Base Bracket Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Base bracket

Removal:

Remove side trim luggage compartment on left side of vehicle → Side luggage compartment trim .
Remove four bolts - 2 - on base mount - 1 -.

Installing:

Installation is reverse of removal.

2 - Nuts (2x)

Tightening torque 5 Nm

3 - Nut

Tightening torque 3 Nm