Overview - Front Three-Point Seat Belt

Fig 1: Overview Of Front Three-Point Seat Belt

Courtesy of AUDI OF AMERICA, LLC

Front Belt Anchor
- Removing and installing. Refer to FRONT BELT END FITTING, REMOVING AND INSTALLING .
Bolt
- 45 Nm
- If it was removed because of an accident, replace the bolt
Bolts
- 5 Nm
- Self-locking
- Always replace if removed
- Threaded holes for screws must be cleaned, for example, with thread cutter
Front Seat Belt Guide
- Removing and installing. Refer to FRONT SEAT BELT GUIDE, REMOVING AND INSTALLING .
Bolt
- If it was removed because of an accident, replace the bolt
- 45 Nm
Seat Belt Guide
Bolt
- 27 Nm
- If it was removed because of an accident, replace the bolt
Seat Belt Height Adjuster
- Removing and installing. Refer to SEAT BELT HEIGHT ADJUSTER, REMOVING AND INSTALLING .
- Always replaced if the belt tensioner has deployed with the belt on
Connector
- For the Driver Belt Force Limiter -G551-
- For the Front Passenger Belt Force Limiter -G552-
- Disconnecting and connecting. Refer to FRONT THREE-POINT SEAT BELT, REMOVING AND INSTALLING .
Connector
- For the Driver Seat Belt Tensioner Igniter 1 -N153-
- For the Front Passenger Seat Belt Tensioner Igniter 1 -N154-
- Disconnecting and connecting. Refer to FRONT THREE-POINT SEAT BELT, REMOVING AND INSTALLING .
Automatic Belt Retractor
- Drivers side: with Driver Seat Belt Tensioner Igniter 1 -N153- and Driver Belt Force Limiter -G551-
- Front passenger side: with Front Passenger Seat Belt Tensioner Igniter 1 -N154- and Front Passenger Belt Force Limiter -G552-
- Removing and installing. Refer to FRONT THREE-POINT SEAT BELT, REMOVING AND INSTALLING .
Bolt
- 45 Nm
- If it was removed because of an accident, replace the bolt