Head Curtain Airbag, Assembly Overview, From My 2011
- Nut
- 9 Nm
- Quantity: 2
- On the threaded bolts
- Connector
- Driver side for Driver Head Curtain Airbag Igniter -N251-
- Front passenger side: for the Front Passenger Head Curtain Airbag Igniter -N252-
- Disconnecting and connecting, refer to REMOVING .
- Head Curtain Airbag
- Driver side with Driver Head Curtain Airbag Igniter -N251-
- Passenger side with Front Passenger Head Curtain Airbag Igniter -N252-WARNING:
Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Removing and installing. Refer to HEAD CURTAIN AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
- Bolt
- 3.5 Nm
- Self-locking
- Always replace if removed
- Clean the threaded hole with a thread tap.
- Clip
- Quantity: 2
- If it was removed because of an accident, replace the clip
- Clip
- Removing and installing. Refer to REMOVING .
- Clip
- Removing and installing. Refer to REMOVING .
- The Entire Line
- Which serves as the anti-rotation protector,
- Must be visible after installation.