Front Passenger Seat Occupied Sensor -G128-, Removing And Installing: Removing
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Remove the front passenger seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture VAS6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Separate the cover from the upholstery (seat pan). Refer to LOWER SEAT FRAME COVER AND CUSHION, SEPARATING, STANDARD, COMFORT, FOLDING SEAT .
NOTE:
Remove only enough of the cushion so that the seat occupied sensor is accessible.
-- Disconnect the seat occupied sensor connector.
-- Carefully lift the seat heating element, if applicable.
-- Carefully remove seat occupant sensor -2- including circuit board -3- from seat cushion -1-.
NOTE:
Ignore the -arrows-.