Overview - Cover And Cushion, Backrest With A Pass-Through
NOTE:
In the illustration is 2/3 left rear seat is shown.
- Center Cushion
- Can only be removed and installed when the center armrest with pass-through cover is removed. Refer to PASS-THROUGH COVER, REMOVING AND INSTALLING .
- Cover
- Cover with upholstery, removing and installing. Refer to BACKREST COVER AND PADDING WITH PASS-THROUGH, REMOVING AND INSTALLING
- Cover, Separating from Cushion and Connecting. Refer to BACKREST COVER AND CUSHION, SEPARATING
- Clamping Strip
- Sewn into cover
- For attaching the cover to the backrest frame
- Cushion
- Cover with upholstery, removing and installing. Refer to BACKREST COVER AND PADDING WITH PASS-THROUGH, REMOVING AND INSTALLING
- Cover, Separating from Cushion and Connecting. Refer to BACKREST COVER AND CUSHION, SEPARATING
- Backrest Frame
- Glue to the luggage compartment floor, refer to BACKREST FRAME, GLUING WITH LUGGAGE COMPARTMENT FLOOR COVERING
- Cushion Clip
- For securing cover to upholstery
- Always replace if removed
- Install in same location as before removal
- Wire
- In foam in upholstery
- For securing cover to upholstery
- Contour Strip
- Sewn into cover
- For securing cover to upholstery