LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q5 2.0T >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Heating, Ventilation & Air Conditioning (2 Of 2) (As Of 06.2014) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Overview - Air Distribution Housing Doors And Partitions >> OVERVIEW - AIR DISTRIBUTION HOUSING DOORS AND PARTITIONS, "Basis" VERSION

OVERVIEW - AIR DISTRIBUTION HOUSING DOORS AND PARTITIONS, "Basis" VERSION

NOTE:

The air distribution housing is not disassembled .

There are different versions of the air distribution housing depending on which A/C system is installed in the vehicle, "Convenience" or "Basis" .

Depending on the production date, there are different versions of the levers and connecting elements on the A/C unit. At the start of production, the levers -A- were installed with a closed pin and the connecting rod -B-. In MY 2008, the levers -C- have a slotted pin and connecting rod -D-. When replacing, be sure to use the correct version..

Fig 1: Air Conditioner, Levers And Connecting Elements
GWWA87-10599Courtesy of AUDI OF AMERICA, LLC
Fig 2: Identifying Air Distribution Housing Basis A/C System
GWWA87-10570Courtesy of AUDI OF AMERICA, LLC
  1. Air Distribution Housing "Basis" A/C System
    • Complete, do not disassemble
  2. Left Housing Half
  3. Right Housing Half
  4. Lever
  5. Door in the "Defrost" Vent
  6. Shaft
  7. Connecting Rod
  8. Door in the Vent Leading to the Center Instrument Panel Vents
  9. Vent Door Leading to the Left Instrument Panel Vent
  10. Connecting Rod
  11. Vent Door Leading to the Right Instrument Panel Vent
  12. Vent Door Leading to the Front Left Footwell Vent
  13. Connecting Rod
  14. Vent Door Leading to the Front Right Footwell Vent
  15. Lever
  16. Lever
  17. Lever
  18. Vent Door Leading to the Rear Left Footwell Vent
  19. Shaft
  20. Vent Door Leading to the Rear Right Footwell Vent