LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q5 2.0T >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Heating, Ventilation & Air Conditioning (1 Of 2) (As Of 06.2014) >> 87 Air Conditioning >> Refrigerant Circuit >> Refrigerant Lines For Battery Cooling Module In Luggage Compartment, Removing And Installing >> Removing

Refrigerant Lines For Battery Cooling Module In Luggage Compartment, Removing And Installing: Removing

-- Turn off the ignition.

-- Discharge the refrigerant circuit. Refer to USING SERVICE STATION . For additional information, refer to OVERVIEW - REFRIGERANT CIRCUIT, NOT OPENING THE REFRIGERANT CIRCUIT, VEHICLES WITHOUT HIGH VOLTAGE SYSTEM  and OVERVIEW - REFRIGERANT CIRCUIT, OPENING THE REFRIGERANT CIRCUIT, VEHICLES WITHOUT HIGH VOLTAGE SYSTEM  (Refrigerant R134a, Servicing; Refrigerant Circuit, Using Service Station).

-- Remove the high voltage battery. Refer to HIGH VOLTAGE BATTERY, REMOVING AND INSTALLING .

-- Remove the bolts -2 and 3- and the refrigerant lines -1 and 4-.

Fig 1: Identifying Refrigerant Line Components
GWWA87-11125Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 4- and disconnect and remove the refrigerant pipes -1 and 3-.

Fig 2: Identifying Refrigerant Pipe Components
GWWA87-11126Courtesy of AUDI OF AMERICA, LLC
NOTE:

Close all open lines and connections on the refrigerant line with suitable caps (avoid dirt and moisture from entering the system).