Overview - Supercharger Ribbed Belt Drive
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Supercharger Ribbed Belt
- Check for wear
- Removing and installing. Refer to SUPERCHARGER RIBBED BELT, REMOVING AND INSTALLING .
- When installing, make sure it is seated correctly on the ribbed belt pulleys
- Bolt
- 40 Nm
- 37 Nm when using Wrench - Door Adjusting 3320
- Washer
- Cover
- Supercharger
- Refer to OVERVIEW - SUPERCHARGER .
- Idler Roller for Ribbed Belt
- Vibration Damper
- With double ribbed belt pulley
- Installation is only possible in one position because of the offset holes
- Removing and installing. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
- Bolt
- Tightening specification: 20 Nm +90° turn
- Ribbed Belt Tensioner
- Removing and installing. Refer to SUPERCHARGER RIBBED BELT TENSIONER, REMOVING AND INSTALLING .
- Bolt
- 40 Nm