Aligning Tail Pipe

Procedure 

Fig 1: Checking Distance Of End Pipes At Left/Right To Bumper

Courtesy of AUDI OF AMERICA, LLC

• Tightening specification, refer to OVERVIEW - MUFFLER .

-- Check distance of left and right tail pipes to bumper:

• Dimension -x- left = dimension -x- right.

Correct dimension -x- as follows if necessary:

Fig 2: Identifying Brace Threaded Connection -Arrow-

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the brace threaded connection -arrow- between the exhaust pipes.

-- Adjust the distance of the rear mufflers to each other.