Headrest Cover And Cushion, Removing And Installing: Installing

-- Insert the cushion -1- into the cover -2-.

-- Insert headrest mount in upholstery with cover.

-- Close the main zipper by moving the upper cover flat channel -1- over the cover -2-.

Fig 1: Closing Main Lock

Courtesy of AUDI OF AMERICA, LLC

-- Slide the edge of the fabric edge with the flat channel into the U-channel -5-.

-- Closing the side locks is similar to the closing the main lock.

-- After closing the main zipper and the side zippers with a needle or other pointed object, line up the cover and the profiles.

-- Ensure the cover sits on the upholstery -3- without any wrinkles and without seam markings.

Install in reverse order of removal.