LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A8 Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Rear Final Drive 0BC, 0BD, 0BE & 0BF >> 39 Final Drive, Differential >> Removal And Installation >> Hydraulic Control Module, 0BE, 0BF >> Removing >> Loosen the left -6- and right -7- lines to the hydraulic control unit -1- one turn -arrows A- and remove them from the chambers -arrows B-.

Loosen the left -6- and right -7- lines to the hydraulic control unit -1- one turn -arrows A- and remove them from the chambers -arrows B-.

Fig 1: Identifying Hydraulic Control Unit
GWWA39-10376Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 through 5- and remove the hydraulic control unit -1- with the seal.