Rear Final Drive 0BD in the Audi Q5
- Production date
- Gear oil specification
- The engine, manual transmission and automatic transmission allocation using the code letters and the PR numbers
| Rear Final Drive | 0BD | ||||
|---|---|---|---|---|---|
| Code Letters | KBB | KHR | KQF | ||
| Ratio | Final drive Z2 : Z1 | 35 : 8 = 4.375 | 43 : 13 = 3.308 | 37 : 8 = 4.625 | |
| Driveshaft flange diameter | 75.5 mm | 75.5 mm | 75.5 mm | ||
| Capacity | Refer to 03 MAINTENANCE, DIAGNOSIS | ||||
| Rear Final Drive | 0BD | ||||
|---|---|---|---|---|---|
| Code Letters | LLU | ||||
| Ratio | Final drive Z2 : Z1 | 42 : 9 = 4.667 | |||
| Driveshaft flange diameter | 75.5 mm | ||||
| Capacity | Refer to 03 MAINTENANCE, DIAGNOSIS | ||||