Charge Air Pressure Sensor -G31- / -G447-, Removing And Installing: Removing

Cylinder Bank 2 (Left): 

Fig 1: Identifying Vacuum Hose -1-, Bolts -Arrows- And Cover -2-

Courtesy of AUDI OF AMERICA, LLC

-- Free up the vacuum hose -1-.

-- Remove the screws -arrows- and remove the cover -2-.

Continued for Both Sides: 

Fig 2: Installation Location Charge Air Pressure Sensor -G31- /Intake Manifold Temperature Sensor -G72-

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Remove the bolts -arrows- and remove the charge air pressure sensor.