LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A7 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 3.0L - Turbocharger & Supercharger - Engine Code(S): CGXB & CTUA >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31- / -G447-, Removing And Installing >> Installing

Charge Air Pressure Sensor -G31- / -G447-, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

NOTE:

Replace the self-locking screws and the O-ring.

Clean the threaded holes for the charge air pressure sensor inside the supercharger housing with a thread tap before assembling.

scientia non olet · About LEMON Manuals